In home life, we are often troubled by a large number of items and tight storage space.
But have you ever thought about it at this time?The real reason for this situation is not that there is not enough space, but that we are not good at squeezing "hidden space"?
If you don't believe it, just take a look at the following 8 pressing methods, which are absolutely teachable at a glance, which is the most practical zero-waste life aesthetics.
In the wardrobe at home, after hanging clothes normally, a part of the space will be vacated inside and outside, and the "narrow" clothes such as stockings and leggings are not easy to store.
According to the actual space situation, one or two L-shaped clothes rails are installed vertically between the top and side panels of the wardrobe, so that there is a "narrow storage area".
In terms of space, the narrow space leggings are just right to fold in half; In terms of height, pants can hang it if they can hang it; In terms of length, 20cm will not be too long in the hanging area, nor will it be too short, and six or seven pairs of leggings in a season are enough to hang anyway.
It is very convenient to take or take it, improve the utilization rate of the wardrobe, and look at the wardrobe neatly and neatly at any time.
If the wardrobe space is large enough, you can also have one inside and one outside, the inside is thin, and the outside is thick, anyway, this space is idle and idle, and there is no need to use it in vain.
In addition to the difficult storage of leggings in the wardrobe, underwear, suspenders, silk scarves, socks and other small bits and pieces will also affect the cleanliness of the cabinet.
This wardrobe strap hook is not a "new" thing, but from"Hanging" becomes "side-mounted."Slide」is not a kind of "optimization innovation".
On the one hand, it is more space-saving, and the width of the hook is just the width of the flange base that is not usually used; On the other hand, you can use the longitudinal space on the whole side, such as hanging underwear on the top, and a layer of hanging suspenders and silk scarves can be installed below.
There is space again, and you can also attach a pull-out sock storage box underneath, from top to bottom, it is just a space to hang a piece of clothing, but all the small bits and pieces are arranged properly, really not too desperate.
There is this kind of pull-out trouser rack at home, because of the trouser rack design, there are more than ten empty spaces above.
I have it at home, so seeing how to use the space above the trouser rack is really teachable!
Arrange a nail-free U-shaped shelf on the left and right sides, and then put the storage box, so that there are two more "small storage areas".
Although it is only about ten centimeters high, it is absolutely expensive for families with insufficient storage space, and when taking pants, it is very convenient to take the matching tie and socks by the way.
The upper and lower layers also pull their own and do not affect each other.
Oh yes, it doesn't cost anything to change it, a budget of dozens of dollars is enough, and it can definitely be called a "low-cost, zero-waste" life aesthetics.
It will be a pity that the narrow window sill at home cannot be used, especially when the countertop space is tight, and it is even more desirable that it can play a role and share part of the burden of storage.
This window sill extends the shelf board, it is very clever to solve this pain point, it is below two magnetic corner codes, and the window sill is flattened, the extension plate is placed on it, and the window sill has been widened.
Since then, when the food preparation area, pots, and kitchen appliances can be easily handled, which is equivalent to half an extra countertop, and because it is magnetic, it can be flexibly disassembled and cleaned, which is too ingenious.
In the cabinet at home, after putting things, there will be a waste of upper space when entering the field, and then the first reaction of people who love home tidying is to buy storage hanging baskets to use, which is indeed a method, but there is a more affordable plan than T.
Use the whole house to customize the remaining boards, and match the nail-free corner code in the right-angle direction, and the cabinet will instantly have half a layer.
There is no board, and other hard, supportable things are fine, and the main thing is what is used at home, just spend a few dollars of dime.
The benefits of this are:
The cabinet area is divided into two, one high area and one multi-layer low area, which has a higher degree of flexibility to match items;
If you want to put something in a high position in the future, it is easy to disassemble at any time, and there is no cost loss;
This method is not only suitable for utility cabinets, but also for any cabinets, wardrobes, shoe cabinets, etc., which have space above, and it is suitable for two, three, and countless if one is not enough.
Many people have space above their kitchen cupboards, and they haven't thought about adding a thin layer of drawers on top, but the price of the drawers is not cheap, so the idea is "shelved". If you are too, here's how to "see" it.
It uses two two-way small slide rails, an acrylic tray, and a circle of 3m double-sided tape, which costs only a few dozen yuan in total.
The step method is also very simple, buy the acrylic tray with the same width as the drawer, and then fix the slide rail and tray with 3m double-sided tape.
When gluing, pay attention to the slide rail is pulled in both directions, so make sure that the tray moves inside and outside just right.
After gluing, the tray is used, which is no different from the inner drawer of hundreds of pieces, and the tray that is key to the inner plate of the drawer does not have any load-bearing worries.
Open the drawer, the items are classified and neatly displayed, and after closing the drawer, you can't see that there is still a "hidden mystery".
Regarding kitchen hangers and spice storage, basically 90% of people will choose to buy and open separately, but in fact, the more ingenious and practical method is "integration".
Ways like this way to arrange the board on the hanger can hide the messiness of some of the hooks to a certain extent.
Regardless of whether the spice bottle is placed on the partition in the future, or the preparation plate, the items that are "integrated" together will reduce the "messy surface", not only will this piece look visually tidy, but the whole kitchen will look simple and neat.
The same is true for the matching method of toilet box + partition in the bathroom!
There is not much space at home, especially after putting the bed, leaving only a distance of thirty or forty centimeters, what should I do if I can't put the bedside table? Don't be afraid, the following "narrow headroom utilization" designation can give you some ideas.
Abandon the idea of traditional bedside tables, simply customize a wooden shelf that fits the size of your home, and then match the woven storage basket below, the capacity is even larger than the drawers of the general bedside table, and it is tightly seamless, and the appearance is also very high.
On it, according to daily life habits, projections, lamps, books, whatever you want to put it, the original「極限操作」, which became today「Extreme comfortIt's really too teachable for small households.