Decoration is a rigorous and complex project, a little attention will overturn, the construction of different materials cohesion, the fine treatment of the structure, some process gaps are not good, the decoration as a whole may overturn, so we must pay attention to the gaps in the decoration to reduce the possibility of decoration overturning.

Today, let's take a look at the gaps in daily life and how to make up for them in time.

Floor tiles/gaps between floors and walls

▲ If the gap between the floor tiles or the floor and the wall is more than two centimeters, this will be a bit tricky. Because the baseboard is usually 5.0cm wide, unless you can find a thicker baseboard to cover it, or you can cut tile strips to fill in the gaps, but it may not look good visually.

▲The best way is to cement the wall or use plaster to thicken it, and the wall will become smooth and smooth, and the effect will be better.

Gaps between doors, windows and walls

▲After replacing doors and windows, common gaps can be treated with styrofoam. If the gap is too large, it will be troublesome to post-process without tiling.

▲In fact, the solution is very simple, choose to make window sleeves or door sleeves to cover larger gaps; If the balcony is not a wall brick, the new window can be leveled with gypsum board to achieve the overall unified effect of latex paint between the balcony and the living room.

The gap between the shower and the wall

▲ When installing the shower, there is a gap problem, which cannot cover the round hole or the inner filament of the shower protrudes too much from the wall, which affects the appearance.

▲There are many ways to cover the gaps, such as using buckle forms, magnetic decorative covers, and retractable decorative covers, which can be easily solved no matter how big the gaps are.

Socket and wall gaps

▲When installing the socket, if the hole is too large, or it is blocked by the custom cabinet, and the cost of re-opening or adjusting the custom cabinet is high, you have to use some artifacts to solve it.

▲If there is a gap in the tile, you can use a decorative cover to cover the ugliness without replacing the tile; If it conflicts with the cabinet, the panel installation problem can be easily solved with a custom cabinet shifter.

The gap between the smoke machine and the wall cabinet

▲About half of the home decoration will encounter such a problem, whether it is a small problem in installation or customization, although it does not affect the use, but it will indeed destroy the overall beauty.

▲You can choose the kind of hook that can be adjusted up and down, big brands of range hoods usually do not contain this kind of hardware accessories, you need to buy it separately; In the case of a side-draft hood, you can re-customize the door to fit the size.

Integrated stove and countertop gaps

▲As shown in the picture above, there is a gap between the integrated stove and the stone countertop, and the size is different. It needs to be dealt with, and it will be more perfect visually.

▲ can be customized wide and narrow closing strip processing, various sizes are available, and the same tempered glass surface as the integrated stove, looks more unified and beautiful.

Bathroom cabinet with glass partition

▲In order to save space, the bathroom cabinet is next to the glass, but the gap is large and cannot be sealed with glass glue. The glass between the glass partition and the bathroom cabinet is easy to get dirty, how to clean it in the future?

▲There are also solutions, buy ultra-thin profiles, the thickness is similar to glass; Or cut the bathroom countertop to achieve a glass glue retractable size.