Washing machines are an indispensable appliance in our daily lives, yet over time, dirt and bacteria can accumulate inside. Many people may try to solve this problem by using the self-cleaning function of the washing machine, but often fail to achieve the desired effect due to improper use. Therefore, it is advisable to be extra careful when using the "bucket self-cleaning" function of the washing machine, as the wrong way of using it not only wastes time, but can also shorten the life of the washing machine.

Precautions for the use of the barrel self-cleaning function:

1. Please give preference to the special detergent recommended by the washing machine manufacturer for "bucket self-cleaning". Avoid using other chemical cleaners, which can cause damage to the internal components of the washing machine.

2. During the "bucket self-cleaning" process, please do not open the washing machine door or interrupt the program at will. Doing so may affect the cleaning results and may cause damage to the washing machine.

3. Before carrying out "bucket self-cleaning", be sure to check whether the power cord of the washing machine is intact and ensure that the power socket is safely grounded. Avoid using this feature in environments where power is unstable or there are safety hazards.

4. According to the instruction manual of the washing machine, set the temperature and time of "bucket self-cleaning" correctly. Too high a temperature or too much time can damage the parts inside the washing machine.

5. After completing the "bucket self-cleaning", make sure that the inside of the washing machine is completely dry to prevent the growth of bacteria. Internal air-drying can be facilitated by opening the washing machine door.

6. Although the "bucket self-cleaning" function is very useful, it does not need to be used frequently. Overuse is not only a waste of resources, but it can also wear out the washing machine unnecessarily. The frequency of use should be reasonably arranged according to the use of the washing machine and the suggestions of the manual.

How to use the bucket self-cleaning function correctly:

1. In the preparation stage, make sure that there is no clothes in the washing machine and it is idle. Check and make sure the power cord is securely connected to the outlet.

2. Find and select "Bucket Self-Cleaning" or similarly named function options on the control panel of the washing machine. Usually this can be found on the program selection knob or touchscreen.

3. If the washing machine manufacturer recommends using a special detergent, add an appropriate amount of detergent to the washing machine according to the instructions. If you don't have a special detergent, consider using a non-phosphorus laundry detergent or white vinegar as an alternative.

4. Select the appropriate temperature setting according to the suggestions of the washing machine manual. Barrel self-cleaning usually requires a higher temperature to effectively remove dirt and sterilize. Most washing machines' bucket self-cleaning program automatically sets the appropriate time, but if you can adjust it manually, make sure you choose a long enough time to guarantee a thorough cleaning.

5. After confirming all settings, start the bucket self-cleaning program. The washing machine will begin to fill with water, heat up, and clean the interior by rotating it.

6. During the operation of the bucket self-cleaning program, please do not turn off or interrupt the washing machine. Wait for the program to end automatically, depending on the model of the washing machine and the program settings.

7. After the program is completed, open the door of the washing machine and let the inside be fully ventilated and dried to prevent mold growth. You can use a clean cloth to wipe off water droplets and residue inside the washing machine.