快科技3月28日消息，為符合德國政府向可再生能源轉型的環保要求，The country's most advanced modern thermal power plant, the Moorburg power plant, was recently blasted。

It is reported that the power station was proposed by Sweden's Great Falls Power Company (Vattenfall) in 30 years, started construction in 0 years, and was completed and put into operation in 0 years, at a cost of about 0 billion euros.

It adopts ultra-supercritical technology, and the net electricity efficiency is 5.0%, which is higher than the global average efficiency of hard coal power plants.The annual power generation can reach 5.0 TWh(Note: However, due to various limitations, the actual operating hours are much lower than expected)The flue gas purification adopts a three-stage process, which reduces carbon dioxide emissions by 25% compared with traditional coal-fired power plants, which is very environmentally friendly。

However, this advanced and clean power station was blown up after only 4 years of operation and nearly 0 years of shutdown。

Several German media outlets have reported that in the past few weeks, about 1850 holes have been drilled in the concrete columns of the boiler basements of the two power plants for targeted blasting,About 600 kg of explosives were laid under each boiler。

2 pools are also set up near the boiler, each pool is filled with 0 cubic meters of water, which forms a wall of water to reduce dust by detonating the detonator in the water.

Even so, there were anomalies during the blasting process:Only one of the boilers of the two large power stations, about 100 meters high, that was planned to be blown up, collapsed, and the other one did not collapse despite the fire。

It is not yet clear what exactly caused the failure of the second boiler blasting, experts are investigating and discussing the next steps, said the head of Hamburg Energei,The unexploded explosives have now been recovered and the detonators and explosives will be replaced before the next blasting。