When it comes to renovating a home, it's easy for many people to overlook the size of their home and think that even a small difference doesn't hurt. However, this is not the case, and sometimes just a centimeter difference can have a serious impact on the future experience. If you take it lightly when decorating and wait until you move in and then find out the problem, I am afraid that it will only be a matter of regret.

1. Door opening size: Be sure to make sure that the door opening width is sufficient, and plan the route of moving large furniture in advance. In particular, refrigerators, washing machines, couches and modular large cabinets, etc., once they cannot enter the home due to size problems, they can only face the embarrassing situation of returning and re-selecting.

2. Socket switch location: When making a water and electricity layout, the position of switches and sockets should be considered synchronously to ensure that they can avoid the obstruction of furniture and baseboards. Otherwise, the switch will be too high, too low, or completely blocked by furniture, which will cause great inconvenience.

3. The distance between the toilet and the door is too close: Many people ignore the opening radius of the door in the early stage of renovation, resulting in the distance between the toilet and the door being too close. In this way, when the door is opened, it is easy to be blocked by the toilet and cannot be fully opened, and the user experience is greatly reduced. Therefore, when installing a door in the bathroom, be sure to check the size carefully to avoid asking for trouble.

4. The cabinet does not fit the wall: When customizing the cabinet, due to the size measurement error, the uneven wall or the influence of the baseboard, there are often small errors, resulting in gaps between the cabinet and the wall. This not only affects the aesthetics, but can also affect the stability and longevity of the cabinet.

5. Cabinet scale design:

Preparation area: The height of the table should be reasonably designed according to the height and habits of the individual, and the formula of (table height + human body height)/50+0mm can be used to calculate it to ensure that there is no need to bend over when cutting vegetables. Sink area: The height of the sink should be consistent with the cutting area, and if a dishwasher is installed, the height of the sink should also match the dishwasher. Cooking area: The cooking area mainly involves the installation of range hoods and stoves. Taking into account the height of the frying pan, the countertop height of the cooking area should be slightly lower than that of the sink area to reduce the lifting of the arm.

In conclusion, when decorating a house, never ignore the issue of size. Once you find out that the size is not right after moving in, it is often too late. Therefore, it is important to be careful during the renovation process to ensure that every detail is in line with your needs and habits.