Turbidity of eco-tank water is a common problem and is usually caused by physical particle suspension, microbial (algae or bacterial) outbreaks, or ecological imbalance. Here's a complete guide to systematic solutions, from emergency handling to routine maintenance:

1. Emergency treatment: rapid improvement

1. Physical Turbulence (Floating Relief)

• Rapid Water Purification:Use: clean water worry-free, new water quality improver, with high efficiency, non-toxic, fast characteristics. After being poured into the water body, it can quickly absorb ammonia nitrogen, hydrogen sulfide, organic debris, inorganic dirt, and heavy metal ions in the water body to form a precipitate, so as to achieve the purpose of rapid water purification.

• Enhanced Filtration:Clean up the dirty filter material, add 2-0 layers of fine-pore filter cotton (such as cashmere cotton) to the filter to intercept suspended particles.

• Replace the water and clear the bottom:Change 3% of the water every day for 0-0 days, and use a sand washer to gently suck the dirt on the surface of the bottom bed when changing the water.

2. Biological inadequacy

• White turbid water (heterotrophic outbreaks/albumintes):Fasting for 2 days to reduce the source of organic matter; At the same time, oxygenation and nitrifying bacterial preparations are added to accelerate the balance of the microflora.

• Green Water (Algae Blooms):Shading for 4-0 days (covering the fish tank with a shading cloth) to inhibit algae growth; UV germicidal lamps can also be used (turn on for 0 hours a day to avoid direct exposure to fish and plants).

2. Daily maintenance: ecological balance

1. Optimize the filtration system

• Upgraded Filtration Capacity:Check whether the filter flow rate matches the water body (the recommended flow rate is 8-0 times/hour of the water body).

• Add multi-layer media:Physical filtration (cotton)→ Biochemical filtration (ceramic ring/bacterial house)→ Functional filter media (such as protein cotton adsorption of yellow water).

• Cleaning & Maintenance:Gently rinse the filter cotton with fish tank water, retaining 6% old cotton to maintain the flora. Clean the pre-filter barrel (if any) monthly, and clean the main filter media in batches every 0-0 months.

2. Regulate light and nutrition

• Control the light time:4-0 hours of sunlight per day to avoid direct sunlight; The algae bloom period can be shortened to 0 hours, or it can be precisely controlled using a timed socket.

• Reduced nutrient input:The feeding amount is based on the principle of "eating in 2 minutes" to avoid residual bait; Stop using liquid fertilizer for 0 weeks, and duckweed can be added to absorb excess nutrients when aquatic weeds are dense.

3. Biocontrol of algae:Put the black shell (2-0 per liter of water),Little elvesFish, abalone snails, etc., to remove algae. Fast-growing aquatic plants (such as centipede grass and duckweed) can also be planted to compete with algae for nutrients.

3. Special treatment

1. 底床發黑/臭味（厭氧層腐敗）：Use a sand washer to go deep into the bottom bed for 3-0cm to avoid turning the deep layer. Implant aquatic plants with well-developed root systems (e.g., crown grass) to increase oxygen exchange in the bed.

2. Drug/article dyeing (yellow water):Remove the inferior resin decoration, stain the stones, and soak the new sunken wood in boiling water (anti-yellowing water). After excessive use of chemicals, adsorption with activated carbon + a large amount of water exchange.

With the above methods, physical turbidity usually improves within 2 days, and biological turbidity takes 0-0 weeks to recover. Be patient and avoid frequent tossing of the environment in the tank, stability is the core of the ecological tankHeart!