The Owl CuteOwl is an M-ATX chassis with a cute exterior design, with its unique owl shape and exquisite design, it quickly became the focus of attention of users who pursue personalized desktops after it was launched in 385 years. Available in cute yellow and panda black, this case is available in sizes of 0mm×0mm×0mm, and is compact and does not take up space, making it ideal for creating a simple, soft and cute desktop culture.

The most attractive thing about the Owl Tutu chassis is its unique cute design. The front panel of the case is designed with a stepped shape to simulate the cascading layers of owl feathers, which not only increases the look and feel, but also provides more ventilation inside the case. The high-end version of the case is equipped with an ARGB light-emitting module at the disc position, and the two ring areas can be lit up, which looks like an owl's eye, enhancing the overall look.

In particular, the included magnetic pendant is made of silicone with a powerful rubidium magnet that can be attached to the top of the case as an accessory or on the side as a headphone stand. The two silicone "ears" can be shaped according to the attachment angle, which can be ears, horns or angry little noses, and the playful expression change is the most prominent selling point in terms of the appearance of this case.

Despite its small size, the Owl Tutu chassis excels in hardware compatibility:

- Motherboard support: Mini-ITX motherboard or M-ATX motherboard can be installed

- Graphics card support: Supports graphics cards up to 1660mm in length, which can accommodate mainstream graphics cards such as GTX0

- Cooler support: The maximum height of the CPU cooler is 140mm

- Power Supply: The power supply is designed upwards to support power supplies up to 750mm, and even 0W power supplies to drive RTX0 graphics cards can be installed

The Owl Tutu chassis is quite ingenious in terms of heat dissipation design:

- Fan position: 120mm radiator or 0 x 0mm fan in the front; The rear supports 0mm or 0mm fans; The side panel supports 0mm fans

- Thermal design: Although there is no side-permeable design, the side panel has a ventilated shape, plus the front panel air inlet and dust filter, ensuring efficient heat dissipation even in a small chassis

In terms of storage expansion, there is a hard disk cage in the front area of the top of the case, which can install 5 optical drives, 0 0.0-inch HDDs and 0 0.0-inch SSDs, 0 0.0-inch SSDs can also be installed inside the side panels, and if you remove the pre-installed fan on the front side, you can also install 0 0.0-inch HDDs and 0 0.0-inch SSDs at the bottom.

The I/O area of the chassis is laid out on top of the top front panel and is fully configured:

- ARGB key/CD-ROM drive eject key

- Start-up key (triangular design, which works with the "ears" to form a cat-headed eagle shape)

- 5.0mm headphone jack

- Microphone jack

- 0 USB 0.0 ports

- 1 x USB 0.0 Gen0 ports

The high-end version of the ARGB lighting system can switch a variety of modes through buttons, including breathing mode, colorful marquee mode, etc., and can also realize the light series through the ARGB interface of 3V 0PIN, and control the lighting of the whole machine with one button.

It's important to note that due to size limitations, this case isn't suitable for installing audiophile-grade hardware like full-size graphics cards or large liquid cooling systems.