In the bathroom, there are two distinct functional areas, washing and bathing, which undertake their respective missions. But every time it is time to bathe, the bathing area seems to be cast with "water magic", the water splashes wantonly, and the fog spreads, as if there is a "siege of the city" trend, not long after, the adjacent bathroom area suffers, the countertop is wet, the ground is "flooded with gold", not only easy to slip, long-term dampness also breeds bacteria, damage items. Therefore, before the official opening of the bathroom, the "key fortification" of dry and wet separation must be done. In this issue, we have carefully sorted out several different methods, from glass partitions to shower curtains, so let's start transforming them according to your own situation!

In the rain area, a glass partition is pressed on the side of the shower head, so that the water will not splash elsewhere. The ground treatment is tilted at an angle to the lower inlet to prevent water from overflowing. ▼

You can also add a rain base with a recess to prevent water from flowing out. Connect to a terrace bathing area next to the base, and wipe it down so that you don't bring water to the washing area. ▼

Use the front mirror as a partition glass, one thing for two purposes, other ingenuity. ▼

A glass partition is added between the rain area, the toilet and the sink in the long bathroom to better prevent the spread of fog. Note that there is a height difference between the ground handling in the rain area and other areas. ▼

Semi-partitions are good at protecting against splashwater, but they are not very effective at preventing fog from spreading. To achieve complete separation of wet and dry, the bathing area needs to be completely enclosed.

Thresholds are built on the floor and glass shower rooms are installed. ▼

On the side of the shower room, you can ride out a small platform for a sitz bath or to store bath products. ▼

The shower room is next to the bathtub counter, turning part of the tub terrace into a bidet area. ▼

Compact space, add a glass door directly to the bath. ▼

A solid wall separates the shower area from the toilet area, which does not interfere with each other and is convenient for simultaneous use. ▼

If you want to get more privacy and independence, and achieve both bathing and "convenience", you can also separate the bathroom from the small room.

The bathroom is then separated from the toilet to ensure privacy and to keep out unpleasant odors. ▼

Shower area, bathtub, toilet each occupy a piece. ▼

The shower room is separated from a separate room. ▼

Compared with the above partition method, the shower curtain does not touch the sky and does not touch the ground, and it has a poor effect on blocking fog and splashing water. However, the shower curtain renovation cost is small, the impact on the space is small, and when used properly, it can also play a good role.

Shower curtains are more effective in bathtubs. First, there is relatively little steam in the bathtub, and secondly, the shower curtain can hang down to the edge of the bathtub, and the water is not easy to splash. ▼

Hang as high as possible. ▼

Add a higher threshold in the rain area to reduce splashing, and hang the shower curtain to the ceiling as much as possible. ▼

The content of this article comes from the Internet, if there is any infringement, please contact to delete, thank you!